Two routers

Forums Forums Qu Forums Qu general discussions Two routers

This topic contains 5 replies, has 4 voices, and was last updated by Profile photo of [XAP]Bob [XAP]Bob 4 years, 10 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #60547
    Profile photo of skippy
    skippy
    Participant

    Is there any way to have two routers hooked to the board and have them both work with the apps?

    #60549
    Profile photo of WaihekeSoundie
    WaihekeSoundie
    Participant

    Why would you want to do that? What are you trying to achieve?

    #60550
    Profile photo of skippy
    skippy
    Participant

    One as a possable back up, or have the qu users on one and the FOH on the other.

    #60551
    Profile photo of skippy
    skippy
    Participant

    Just curious if it can be done…

    #60554
    Profile photo of Andreas
    Andreas
    Moderator

    Sure, why not? Just ensure that:

    – All routers are configured for the same subnet (different Router IP addresses, of course)
    – There is only one router supplying DHCP addresses (or ensure that DHCP ranges do not conflict)
    – Both WLAN settings use same Name/Security/Password

    Have this setup with an Airport Express at FOH and some cheap TP-Link on Stage.

    #60586
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    The two wlans don’t need to be the same ssid/security – but otherwise a good description of what needs to happen.

    Two dhcp servers can work if they are set to different ranges (it’s a harmless race if done well)

    If you share ssid and security then enforce channels – different channels per radio

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.