TCP Port

Forums › Forums › SQ Forums › SQ general discussions › TCP Port

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of Ryan Ryan 5 years, 5 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2018/10/18 at 9:21 pm #79368
    Profile photo of Ethan
    Ethan
    Participant

    Hello all,

    What TCP Port does the ethernet connection use? I want to forward some traffic from one subnet of our network to the subnet with the SQ to allow people to use SQ4You app.

    Thanks

    2018/10/20 at 2:48 pm #79419
    Profile photo of Ethan
    Ethan
    Participant

    I used Wireshark and could not find packets to/from the SQ. Any help would be appreciated. Thanks

    2018/11/09 at 8:47 pm #79937
    Profile photo of Ryan
    Ryan
    Participant

    I haven’t looked at the SQ much beyond the app (since I don’t own or have access to an SQ), but the initial request seems similar to the Qu — the mixer/app exchange some information about what ports (status updates over UDP, control over TCP) to use, so it isn’t always the same port.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.