Stereo mix to mono channels

Forums Forums Qu Forums Qu general discussions Stereo mix to mono channels


This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Mike C Mike C 5 months, 1 week ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #106211
    Profile photo of stupaak

    Hope all is well with everyone despite the lead up to wold war. I am hoping that’s a joke. I am about to use 2 cords that are xLR to 1/4 inch balance. My goal is to get the 5/6 stereo mix into 2 mono channels in my DAW all within QU32. Does anyone know if this will damage the QU or cause an noise anomaly.



    Profile photo of Mike C
    Mike C

    That would work, just make sure you do not send those mono channels
    back into mix 5-6, to be safe I would un assign mix 5-6 from those channels.

    In the USB IO set up you can assign the mix directly to two of the USB output tracks.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.