Stereo Bus and Faders

Forums › Forums › Avantis Forums › Avantis General Discussions › Stereo Bus and Faders

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 2019/12/11 at 6:31 am #88193
    Profile photo of JosephJoseph
    Participant

    If I have stereo mix buses like Aux/Matrix/Groups when I assign to a channel strip is required two faders or single fader suffice?

    2019/12/11 at 11:04 am #88198
    Profile photo of SteffenRSteffenR
    Participant

    single fader

    2019/12/11 at 2:02 pm #88204
    Profile photo of volounteervolounteer
    Participant

    @Steffen R

    does it matter which ? does it default to odd or even fader? what if you have a split stereo track and want to adjust them separately? is this obvious in the manual? is it in the manual at all?

    2019/12/12 at 2:19 am #88213
    Profile photo of Anonymous
    Inactive

    There is no user manual out yet.

    2019/12/12 at 12:15 pm #88216
    Profile photo of SteffenRSteffenR
    Participant

    does it matter which ? does it default to odd or even fader? what if you have a split stereo track and want to adjust them separately? is this obvious in the manual? is it in the manual at all?

    what do you talk about?
    there are no split stereo tracks at the mixes
    if you have a stereo mix then you have one fader

    https://www.allen-heath.com/media/AP11558_4-Avantis-Getting-Started-Guide-ISS4.pdf

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.