'stealing' more inputs

Forums Forums SQ Forums SQ general discussions 'stealing' more inputs

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #95074
    Profile photo of whatsoupwhatsoup
    Participant

    I was down to one XLR input on my SQ-5 until I realised the unit has 4 x 1/4″ inputs, so I’m really happy I can expand my setup.

    This has got me thinking, what else can I steal as inputs if I ever run out?

    There’s the front 3.5mm, what about the mic talk back input? any other tricks I can pull? thanks

    #95078
    Profile photo of SteffenRSteffenR
    Participant

    all inputs are patchabel

    16 Mic inputs, 1 Talkback, 6 Line level inputs 4 on TRS and two on mini jack
    you can add an AR84 AB168 DX168 AR2412 or GX4816 without adding a card
    if you add a Dante card you can patch 64 channels from the Dante network additional to the DX and the local I/O

    have a closer look on this
    DX-GX System Guide

    #95090
    Profile photo of whatsoupwhatsoup
    Participant

    That should keep me going for a while, thanks. I will experiment using them tonight. I didn’t even know there was 2 x mini jacks on the sq5

    #95092
    Profile photo of Søren SteinmetzSøren Steinmetz
    Participant

    There is 1 mini jack, but as it is used as “aux in” it is unbalanced stereo and thus 2 channels 😉

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.