SQ USB output to DAW at 44.1khz

Forums Forums SQ Forums SQ general discussions SQ USB output to DAW at 44.1khz

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of nottooloud nottooloud 8 months, 1 week ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #88717
    Profile photo of Andy
    Andy
    Participant

    Is the only option for coming out of the SQ5 USB 32X32 and into a DAW 24bit @ 96khz? I would love to be able to have the option of 24bit @ 44.1khz. It would free up some much needed hard drive space.
    Thanks

    #88729
    Profile photo of Alex A&H
    Alex A&H
    Keymaster

    Hi Andy,

    The SQ USB B interface is fixed at 96kHz and there is no option to change this from the SQ. However, many DAWs support sample rate conversion during recording, so you could try this if you need to save on hard drive space.

    Thanks
    Alex

    #88966
    Profile photo of nottooloud
    nottooloud
    Participant

    Another option is the Dante card, which will allow you to send 48k.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.