SQ 5 dismount feet

Forums Forums SQ Forums SQ troubleshooting SQ 5 dismount feet

Tagged: 

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of TA-Max TA-Max 1 month, 2 weeks ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #118912
    Profile photo of TA-Max
    TA-Max
    Participant

    Hey All.

    I got a new road case for my Sq5.
    there is a 1HE Rackspace underneath the desk.

    The problem: I have no idea how to dismount the four feet on the underside of the desk.
    Unfortunately they’re blocking my interface, so i can’t put it in my rackspace.

    #118973
    Profile photo of SQuser
    SQuser
    Participant

    I think your concern has nothing to do with troubleshooting, but rather the opposite. 😉

    The feet are small plastic rivets that spread out on the inside.
    Theoretically (!) you should be able to pull them out by force.
    But the plastic parts will probably break off and then roll around in the console.
    The SQ should therefore be opened better for this.

    But (!!!): The 4 feet are intentional – also because there are ventilation slots in the back that should never be covered!

    Attachments:
    You must be logged in to view attached files.
    #120071
    Profile photo of TA-Max
    TA-Max
    Participant

    Hey again.

    Thanks for you reply.

    I think the ventilation will not be influenced in my case.
    The desk is mounted with the original rack-ears and there is just one small moth m2 and one mac mini underneath the desk.
    So nothing will block the ventilation.

    The only problem is:

    When i open the desk to dismount the feet, my warranty will be expired, right ?

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.