SQ 5 Complete Guide

[Shashank]

Hi there.
Can anyone please help me how can i connect and rout my powered speaker for stage monitor with the same mix as my main LR with individual volume control for my each stage monitor?
i have 6 Stage Monitor Speakers

[Søren Steinmetz]

One way could be:
Configure the console with 6 mono Aux sends.
Have all inputs set at 0dB on all 6 sends (all set to POST).
Then you have the Aux masters for those sends as “volume” on each monitor, yet if needed you can still change the levels of each channel send to each monitor.

Alternative is to configure 6 mono Groups instead of AUX, and assign all channels to all Groups.

[Shashank]

thank you so much for answering.
I did it but the fx is not going in monitor speakers. may be i did wrong configuration, can you guide me how can i configure to mono aux

[Søren Steinmetz]

You need to send the FX return to each Aux as well, just like the IP channels.

[Shashank]

ok, if i want the fx only on mic 1 and 2 which is for vocals. so the fx rtrn will go to only vocals?

[Author]

Posts