Split foh and mon

Forums Forums GLD Forums GLD general discussions Split foh and mon

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of  Anonymous 5 years, 2 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #53806
    Profile photo of
    Anonymous

    If I were to have a two gld80 and one ap2412. How would I do a FOH mon set up

    Master slave digital spit

    From one stage box

    Thanks

    Would I like the consoles with an ACE card

    And send the card channels to the other console and on use the pres.

    Thanks

    #53811
    Profile photo of Scott A&H
    Scott A&H
    Participant

    Hi Cookie,

    Yes that’s correct.
    2 x GLD with ACE Cards
    All inputs into AR2412
    Signal first goes to 1 x GLD that is Master
    Master GLD sends signal to Slave GLD

    Patching at I/O Screen

    Don’t forget to set the slave sync clock!
    SETUP
    Audio
    Audio Sync
    Set the slave second GLD to – Slave Option Card.

    Regards,
    Scott
    A&H Support

    #53817
    Profile photo of
    Anonymous

    So one console would run the analog pre and the slave would use its digital trim cool thanks

    The new giga ace is that only for dlive and dm racks

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.