I’m sure this has been said before but I cant find it.
I find it really difficult to use the soft rotary with no feedback as to what position it is in. Would love to be able to, for example, cut levels by half quickly and reliably or jump up to 0db without having to double check a fader after adjusting. I think as soon as the knob is touched it would be awesome if the display changed to a level bar, that filled up at 100% and was empty at 0%, with a couple of notches (-30db and 0db). Similar to the level display on a ME device.
In my mind it would then hold on that display for a second or two after you let go and then switch back to the name.
.
.
