Select button triggers midi note

[ianhindParticipant]

It would be super helpful if the select button on each channel sent a midi note.

I use MultiRack and have “hotkeys” setup through a midi controller to pull up plugin windows.

It would be amazing if when I select a channel on the SQ to control it’s gate/comp/eq/etc. it would also pull up my plugin window inside MultiRack.

Since midi has 128 notes per channel, it’s more than enough to have every input, aux, buss, to have a dedicated note trigger.

[JpratchettParticipant]

I agree and have also asked A&H this.
I can set Superrack to switch when you touch a fader, but select would be best.

[ioTonParticipant]

+1 for sending a midi note of the selected channel

AND
+1 for vice versa
Select a channel via a midi note

Thanks
dd

[Andre SParticipant]

I support this request! Even if waves has still not released drivers for the m1 Macbook and the waves card in my SQ is just a dust cover…😩

[YannParticipant]

+1 if it was implemented it would be 2 way because its always the same message in or out from SQ

[jc2000Participant]

Please, add some midi messages for the select buttons!

It would be great to translate the midi messages to control a certain channel in SPAT, L-isa, Soundscape, Klang, Waves,…

Thanks in advance!

[ScottParticipant]

+1 This would be very nice when using Waves MR with SQ.

[KilianBParticipant]

+1

[maw92Participant]

Bumping this up again, we need this! <3

[Author]

Posts