Remove PEQ frequency band limits

Forums › Forums › Avantis Forums › Avantis feature suggestions › Remove PEQ frequency band limits

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of JR Richardson JR Richardson 2 years, 11 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2021/05/21 at 4:04 am #101435
    Profile photo of JR Richardson
    JR Richardson
    Participant

    I’ve had a few situations where I’ve allocated my first 3-bands of PEQ, but was unable to make use of the remaining band, because of the sweep limits.

    I would love (love love) it if all PEQ bands were fully flexible and could go anywhere across the spectrum.
    Happy to retain the confines of the LF/HF Pass/shelf functions, but full sweep-ability would be rad!

    2021/05/21 at 7:37 am #101438
    Profile photo of Mfk0815
    Mfk0815
    Participant

    Have you ever tried to check the PEQ options? As far as I understand the manual you can set the frequency range for each channel individually or global for all channels.

    2021/05/21 at 3:03 pm #101442
    Profile photo of Jgrift
    Jgrift
    Participant

    You will find this is an option. Hold the option button in the lower left of the screen when a EQ is viewable. You will see a gear. Options allows for output and input EQs to not have limits.

    2021/05/23 at 8:02 am #101488
    Profile photo of JR Richardson
    JR Richardson
    Participant

    Awesome!It’s fair to say I haven’t fully explored all of the options, yet.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.