Comment connecter Mes 2 surfaces DliveS5000

Forums › Forums › dLive Forums › dLive troubleshooting › Comment connecter Mes 2 surfaces DliveS5000

  • This topic has 1 reply, 2 voices, and was last updated 1 week ago by Profile photo of BrianBrian.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2024/11/23 at 6:53 pm #127510
    Profile photo of ramazaniramazani
    Participant

    Bonjour j’ai 2 surface Dlive S5000 que voudrai les utiser un comment FOH et L’autre comme MON sur un MIXRACK DM64
    avec des gain Partagé sur bchaque surface?
    Merci a vous.

    2024/11/25 at 1:50 pm #127529
    Profile photo of BrianBrian
    Participant

    You just need a GigaAce I/O card that you can install into the DM64. You’ll connect one surface using the built in GigaAce ports like normal (most would probably connect the monitor surface this way) and then you’ll connect the second surface using the GigaAce card. At the second surface, you’ll connect the line(s) into the built in port like normal as well.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.