QU USB Recording

Forums › Forums › Qu Forums › Qu troubleshooting › QU USB Recording

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 2022/10/10 at 7:37 pm #109442
    Profile photo of VinzVinz
    Participant

    Hi,

    QU-24, Mac M1, Reaper

    I record a track via USB, based on Input 1 for exemple of QU-24 and If I mute the channel (on QU) I always receive the signal on Reaper. How to mute on recording when I mute a channel on QU ?

    Thanks
    Vincent

    2022/10/10 at 11:26 pm #109446
    Profile photo of Mike CMike C
    Participant

    There is global direct out setting menu in the channel preamp menu in that menu
    there is selection for the direct out to follow channel mutes and to follow the
    fader as well.

    2022/10/11 at 7:19 am #109451
    Profile photo of Rafael A&HRafael A&H
    Moderator

    Hello @Vinz,

    Select a channel and press the ‘Routing’ key, this will take you to the ‘Global Direct Out Settings’.
    Make sure the option ‘Follow Mute’ is selected.

    Cheers,
    Rafael

    2022/10/11 at 8:04 am #109453
    Profile photo of VinzVinz
    Participant

    Many thanks !

    Regards

    2022/10/11 at 11:37 am #109456
    Profile photo of Mike CMike C
    Participant

    Sorry, I mixed up my menus and locations!

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.