Pink noise signal generator and GEQ

Forums Forums CQ Forums CQ feature suggestions Pink noise signal generator and GEQ

Tagged: ,

Viewing 15 posts - 1 through 15 (of 18 total)
  • Author
    Posts
  • #123548
    Profile photo of dickiefunkdickiefunk
    Participant

    Hi,

    Please can we have a signal generator with at least pink noise and GEQ’s on the outputs.
    I use these features a lot to ring out/tune a system at events and really miss this feature in the CQ.

    #123549
    Profile photo of Highflyer1953Highflyer1953
    Participant

    All outputs have GEQs! But I agree with your request for signal generator, as all other A&H mixers have them, in fact AHM has 8!

    #123551
    Profile photo of dickiefunkdickiefunk
    Participant

    As far as I can see the outputs have PEQ’s and not GEQ’s? Happy to be corrected if I’m wrong.

    #123560
    Profile photo of CrispieCrispie
    Participant

    You can select GEQ for outputs but it’s this useless thing with odd band spacings. It is such a drag that the GEQs are not third octave. Would make it a really useful board but unfortunately it’s almost always left in the shed due to this limitation.

    #123575
    Profile photo of BhubbBhubb
    Participant

    Another vote for a signal generator!

    #123589
    Profile photo of leeshephleesheph
    Participant

    Signal generator would be very useful!

    #123717
    Profile photo of jstametsjstamets
    Participant

    +1 SigGen

    #123877
    Profile photo of al31hal31h
    Participant

    +1 SigGen
    Thanks

    #123938
    Profile photo of JairusJairus
    Participant

    Pink noise would be great but why stop there. Could we also get some kind of room tuning wizard like the QSC Touchmix has?

    #124167
    Profile photo of SpyrosSpyros
    Participant

    +1 for SigGen and room tuning wizard.

    #124173
    Profile photo of MarkMark
    Participant

    +1 for Sig Gen 🙂

    #124251
    Profile photo of ChienmortChienmort
    Participant

    If Pink Noise were added, could you not use a low cost measurement mic and the RTA to tune the speakers?

    #124516
    Profile photo of DraylenDraylen
    Participant

    +1 on signal generator!

    #124911
    Profile photo of Tatsuya NakamuraTatsuya Nakamura
    Participant

    Signal generator (SigGen)

    +1

    #125443
    Profile photo of MQPMQP
    Participant

    +1 for signal generator! and eq comparison for tuning main out whith test mic 😉
    It will be perfect whith that!!

Viewing 15 posts - 1 through 15 (of 18 total)
  • You must be logged in to reply to this topic.