Networking switch or alternative solution

[Sophia]

Hey everyone 🙂

Something that happens frequently for me is: I’m doing the sound at customer A.
Customer A has super dense wifi network, and a large venue which makes using my CQ-20b in wifi mode almost impossible.
I use ethernet at customer A.
After customer A, I go to customer B. Time is extremely limited.
Customer B doesn’t have ethernet to give me, so I have to use wifi AP mode.
The problem: I always forget to switch from ethernet mode to wifi mode when I finish at customer A. I’m already late and the setup is very complex for this show. I have to have an easy solution for switching between wifi and ethernet, and/or an option to use wifi client mode.

Thank you!

Sophia

[SteffenR]

You can add your own AP to the network. Properly configured, it’s always the same setup.

[KeithJ A&H]

@Sophia

CQ firmware V1.2 included the ability to switch network connection mode on the CQ-20B by a quick press of the reset button.
https://www.allen-heath.com/content/uploads/2023/09/CQ_User_Guide_V1_2_0_iss3.pdf#page=18&zoom=auto,-307,574

Hope this helps!
Keith.

[Sophia]

Good to know! Very helpful!

Thank you so much!! 😍

Sophia

[Author]

Posts