MixWizard WZ1 Troubleshooting

Forums › Forums › Other A&H products › MixWizard WZ1 Troubleshooting

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of mhosinski mhosinski 4 weeks ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2024/03/28 at 9:49 pm #120888
    Profile photo of mhosinski
    mhosinski
    Participant

    My MixWizard 14:4:2 is emitting a pulsing clicking sound on every channel. Any suggestions for troubleshooting or ideas about what might cause this? See video link below.

    2024/03/29 at 5:47 pm #120911
    Profile photo of Mike C
    Mike C
    Participant

    Is the phantom power turned on?
    Does it still pass audio even with the clicking?

    I guessing there is a power supply issue.

    2024/03/29 at 6:18 pm #120913
    Profile photo of mhosinski
    mhosinski
    Participant

    Phantom power is off. No, it’s not passing any audio. I bought it about a month ago on Reverb for routing/bussing flexibility while tracking with outboard gear. The first time I tested it, I didn’t notice any issues. The only thing I’ve done since then is connect the line ins and buss outs to my patchbay. As you can see in the video, the problem is present with all lines disconnected.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.