ME-500 direct to dSnake?

Forums Forums ME Forums ME general discussions ME-500 direct to dSnake?

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of Brian Brian 5 years, 6 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #78335
    Profile photo of Brian
    Brian
    Participant

    Hello, I’m a guitarist in my church’s band. Everyone else seems to have a good monitor mix through a floor wedge system. I am looking at buying a single ME-500 for my mix just to get us started, then eventually daisy chain 2-3 units off of mine. We are using a QU-32 console. With this type of setup, I understand a hub like the ME-U is not necessary?! If the dSnake port is not being used, do I simply go straight to that output with a Cat5 for the first ME-500?

    #78341
    Profile photo of Ryan
    Ryan
    Participant

    Yeah, that setup should work. Check out page 9/10 of the ME manual for some possible setups: https://www.allen-heath.com/media/ME-1-User-Guide-AP8997_3.pdf

    #78342
    Profile photo of Brian
    Brian
    Participant

    Thanks!

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.