ME-1 Channel Output limited

Forums Forums GLD Forums GLD troubleshooting ME-1 Channel Output limited

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of Nicola A&H Nicola A&H 4 months, 1 week ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #61908
    Profile photo of beartech
    beartech
    Participant

    One of the channels on our ME-1 has no output (or very little) even thought we can hear the instrument clearly when solo’ed. We noticed there is a little arrow by the level meter on this output. And the arrow moves when trim all is performed. Amy ideas what this is?

    Attachments:
    You must be logged in to view attached files.
    #85527
    Profile photo of Soundpreacher
    Soundpreacher
    Participant

    I have the same problem! Not sure how to fix this…

    #85550
    Profile photo of Nicola A&H
    Nicola A&H
    Keymaster

    Check that the channel isn’t part of a ME group on another key, which would act like a DCA.
    Also check the Direct Out level for the channel on your mixer, this is per channel so it is possible it was turned down unintentionally.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.