Lost fader control in SQ5 1.4.0

Forums › Forums › SQ Forums › SQ troubleshooting › Lost fader control in SQ5 1.4.0

Tagged: 

This topic contains 0 replies, has 1 voice, and was last updated by Profile photo of The Clog The Clog 4 years, 10 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • 2019/06/13 at 8:48 am #84566
    Profile photo of The Clog
    The Clog
    Participant

    The other day when putting channels in Layer F I lost complete control over the faders . Not funny, could only use the gain to reduce the audio from the video that was playing. The only solution was to clear the fader bank and use the original layers the channels were on. Tried reproducing it and partly succeeded. faders down , selecting channels for Layer F, no audio to auxes. (which were used as matrixes since the only solution AH had for their lack of matrixes was to make them 3x stereo OR 3x Mono.. Bummer)
    Very much not happy about it since i had to answer for the poor audio of the event..
    I like the functionality of the SQ5 for the incredible pricepoint but no thanx for this

    going back to 1.3.8 or take the SD11 out again

  • Author
    Posts
Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.