Global Phantom Switch

Forums Forums Qu Forums Qu feature suggestions Global Phantom Switch

This topic contains 4 replies, has 4 voices, and was last updated by Profile photo of GR-PDX GR-PDX 7 years, 1 month ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #38002
    Profile photo of mamerica
    mamerica
    Participant

    You guys will probably think I’m nuts for posting all these suggestions but what the heck.

    Since the 48Vdc is controlled via software, why not have a switch to toggle power to all channels off at the same time. That would prevent any accidental pops and clicks.

    #38064
    Profile photo of jet1968
    jet1968
    Participant

    There is a switch already, it’s called the mute

    #38067
    Profile photo of MarkPAman
    MarkPAman
    Participant

    I think some people are finding that mute does not stop all sound when plugging into a channel that has phantom on it, though so far I’ve not found this to be a problem. Many of the larger analogue desks had a global phantom switch as well as individual ones – quite a useful feature really.

    #38087
    Profile photo of mamerica
    mamerica
    Participant

    Right,
    Some boards pop even when muted. It’s in the release notes. Try not to be so smug.

    #38088
    Profile photo of GR-PDX
    GR-PDX
    Participant

    I don’t really have a preference for how they fix the popping issue, but I’d like to see it fixed. I don’t think a global phantom switch would suffice when the issue is popping during a scene change, would it?

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.