Finer control of delay value.

Forums › Forums › SQ Forums › SQ feature suggestions › Finer control of delay value.

Tagged: 

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • 2020/02/13 at 8:32 am #89536
    Profile photo of JpratchettJpratchett
    Participant

    I would really like the delay value to be far more granular. The jumps in .ms is far too high to accurately aligned signals. Really an outing when you just want to add an extra 0.01 ms to something to perfectly phase align a signal.

    If it can’t be done with the encoder I would be happy to type the value in on the console or app.

    2020/02/13 at 10:58 am #89538
    Profile photo of anaesthetisedanaesthetised
    Participant

    +1000000

    2020/02/16 at 8:25 pm #89608
    Profile photo of LightLight
    Participant

    yes please!

    2020/02/18 at 1:15 pm #89671
    Profile photo of MaStaMaSta
    Participant

    +1

    2020/02/19 at 1:27 am #89695
    Profile photo of YannYann
    Participant

    +1

    2020/02/19 at 7:56 am #89701
    Profile photo of LaurenteyenLaurenteyen
    Participant

    +1 it would be so nice to make the rotary encoder get speed relative.

    2020/03/04 at 7:06 pm #90009
    Profile photo of lightingman117lightingman117
    Participant

    +1

    2020/03/05 at 6:39 am #90021
    Profile photo of Gregg GreyGregg Grey
    Participant

    +1

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.