Copy Mix settings

Forums Forums Qu Forums Qu general discussions Copy Mix settings

This topic contains 10 replies, has 5 voices, and was last updated by Profile photo of audiokla audiokla 1 year, 7 months ago.

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • #86726
    Profile photo of audiokla
    audiokla
    Participant

    Dear community,
    sorry for my english.
    My question:
    Is it possible to copy the mix 1-10 settings at the Qu-Pac from scene to scene?
    We have spent a lot of time to make perfect settings for our inEar monitoring and want to copy it from one scene to another.
    Is this possible and how?
    Thank you in advance
    Greetings
    Klaus

    #86728
    Profile photo of Roy
    Roy
    Participant

    You can easily copy the channel strip (gain, PEQ, Gate, Compressor etc) by saving your IEM as a complete channel user preset. I do this for all instruments and vocalists and tweak according to the venue (which you won’t need as it’s for IEMs)

    #86729
    Profile photo of audiokla
    audiokla
    Participant

    Dear Roy,
    Thank you very much.
    Sorry, I am a newbie.
    Is this also possible for the mix settings?
    How can I do this?

    #86730
    Profile photo of Roy
    Roy
    Participant

    When you mix settings do you mean fader levels etc? If so, you need to save the scene and recall when you need it. Perhaps set up your IEMs in the first few faders and create placeholders for the other channels with basic settings that you just adjust for the venue.

    #86731
    Profile photo of audiokla
    audiokla
    Participant

    yes I mean fader levels, eq settings etc.

    #86738
    Profile photo of Mike C
    Mike C
    Participant

    Your settings will be save progressively from scene to scene as you keep building new scenes, if you don’t change the mix
    levels they will be the same in each scene re-call.
    Maybe using scene safes or blocks so certain setting are not recalled with scenes would work for you.

    #86741
    Profile photo of volounteer
    volounteer
    Participant

    @audiokla

    page 23 on Qu32 manual says
    The Sel key can also be used to:
    Copy mix processing – Hold down the Copy key and press the Sel key to copy the processing settings. Then select a different Mix, hold down the Paste key and press the Sel key to instantly paste those settings to that mix.

    #86799
    Profile photo of audiokla
    audiokla
    Participant

    ok, thank you all.
    So I can copy via scenes

    #86800
    Profile photo of audiokla
    audiokla
    Participant

    i looked it up in the manual:
    So when I set a scene safe with the mix settings and change the scene, the settings of the mix won’t be overwritten, right?
    and then I can save the new scene.
    Am I right?

    #86804
    Profile photo of SteffenR
    SteffenR
    Participant

    yes that should it do

    a trick… save your actual mix settings to a new scene as a backup… 😉

    #86807
    Profile photo of audiokla
    audiokla
    Participant

    oh yes, thanx Steffen

Viewing 11 posts - 1 through 11 (of 11 total)

You must be logged in to reply to this topic.