Connect two SQ’s

Forums Forums SQ Forums SQ general discussions Connect two SQ’s

This topic contains 5 replies, has 2 voices, and was last updated by Profile photo of Andy Andy 2 weeks, 3 days ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #93654
    Profile photo of Andy
    Andy
    Participant

    Hi Guys,
    I have two SQ’s a 5 and 7.
    5 is used for Monitors and the 7 for FOH.

    Is there an easy way to connect the two so I can use soft buttons on the 7 to action items on the 5?

    Thanks

    #93655
    Profile photo of SteffenR
    SteffenR
    Participant

    to connect them is easy but to control the other SQ within the SQ is not possible at this time
    but you can use MixPad

    #93656
    Profile photo of SteffenR
    SteffenR
    Participant

    haveing the second cup of coffee today makes me think abouit it again

    you can send some MIDI commands over TCP
    so it depends on what you want to achiev

    #93724
    Profile photo of Andy
    Andy
    Participant

    Hi, I’d like to control the soft touch buttons via the SQ7 ie be able to use mute groups etc.
    the SQ5 is for Monitors but rarely has an operator so this weekend was controlled via mix pad, but then I don’t have mix pad for the sq7

    #93726
    Profile photo of SteffenR
    SteffenR
    Participant
    #93728
    Profile photo of Andy
    Andy
    Participant

    Will this send via TCP over Ethernet via a switch or does it have to be direct connect.
    And I’m guessing via this method I can have one desk transmit midi note for mute “mute group 1” and the other desk receive the signal.

    I’ll give it a go tomorrow

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.