ch compressor to aux

Forums › Forums › SQ Forums › SQ general discussions › ch compressor to aux

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2022/03/05 at 5:29 pm #106331
    Profile photo of sayo99sayo99
    Participant

    Hello!
    I set my channel to aux 1 for monitoring. It seems that signal from compressor does not go to aux! It goes to main, but not to auxes. It doesnt matter if signal is sent PRE or POST. On the other hand, gain, HPF, gate and eq go to aux normaly! Am I missing something?
    THX!
    ms

    2022/03/06 at 6:16 am #106335
    Profile photo of Mfk0815Mfk0815
    Participant

    You have to set the channel source of the Aux to postdelay. See chapter 8.2 of the current reference manual for details.

    2022/03/06 at 11:18 am #106341
    Profile photo of sayo99sayo99
    Participant

    thanx!

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.