Access Point for Monitor Setup

Forums Forums Qu Forums Qu general discussions Access Point for Monitor Setup

This topic contains 4 replies, has 4 voices, and was last updated by Profile photo of BeamO BeamO 1 month, 1 week ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #108665
    Profile photo of BeamO
    BeamO
    Participant

    Our band owns a QU-16 Chrome Edition and would like to setup the monitor using a wireless Access Point.
    We will not be using the internet as it will be a closed loop for just the band while we play or practice.

    Any suggestions as to which access point I should purchase that works well with the “QU-16 Chrome Edition”?
    Thank you in advance.

    #108667
    Profile photo of SteffenR
    SteffenR
    Participant

    Too many to nameā€¦ an endless, ever-growing list.
    All standard compliant models will do.
    I use some very old models from time to time with success as replacement for my TP Link Archer C6.

    #108671
    Profile photo of Mike C
    Mike C
    Participant

    Get something with 5g, that just about everything these days.

    I use a TP Link Archer C80, I also carry a TP Link C7 and a Netgrear
    Nighthawk.

    Lots of post here about router and mixer ethernet set up.

    #108679
    Profile photo of Hoody
    Hoody
    Participant

    I see ALWAYS carry a lightning to USB/RJ45 with my iPad when I am using my QU SB. So should the worst happen to my wireless router I can use the SB network port with a nice long cable to connect to my iPad as backup.

    I also have a Amazon fire tablet which I have added the Google play store to and use the mixing station pro app (again I have a mini usb to LAN RJ45 adaptor (I use the Amazon one for firesticks) bloody good app as it even has a feed back killer if you’re new to mixing

    #108683
    Profile photo of BeamO
    BeamO
    Participant

    Looking at the;
    TP-Link AC1900 (Archer A9),
    or
    Netgear Nighthawk R6700-100NAS

    Cost is similar, any thoughts?

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.