USB Record

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Chris93 Chris93 10 years, 11 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #23749
    Profile photo of MJPA Hire
    MJPA Hire

    My USB recording’s seem very quite or have a low recorded level compared to the level of send on the fader to the USB. I have been using the stereo matrix to send the signal to the USB for recording, the meters read a good signal level but the actual recorded level is much lower; and another problem is I cannot fast-forward the recorded track or select a point to play from ‘mid track’. Any ideas?


    Profile photo of Chris93

    The flash drive will record the digital level of the signal you send it. If you want to play back from it and have the audio come out at the same level it went in you will have to put the fader to unity so that you are not making it quieter at the fader.

    Read the section titled “Enter the digital converter”.


Viewing 2 posts - 1 through 2 (of 2 total)

The forum ‘Archived GLD Discussions’ is closed to new topics and replies.