DANTE doubts

Forums › Forums › iLive Forums › Archived iLive Discussions › DANTE doubts

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • 2012/07/02 at 4:19 pm #23217
    Profile photo of Rui-MiguelRui-Miguel
    Participant

    Hi,

    I’m looking into some multi track recording options for integrating on my ilive system, and DANTE seems to be interesting.
    However, when I downloaded the free trial version of the Dante Virtual Soundcard software, I wasn’t able to install it.
    After the initial installing steps, it rolls back and says there was an error, please try again. It won’t specify the error.
    I have Windows 7, and already installed Bonjour for windows, but that hasn’t solved the issue.
    If I can’t even install the trial version, I’ll be afraid to invest in the whole system.

    Can anyone help me out here?
    Thanks in advance

    Surface: T112 / T80
    Rack: iDR48 / iDR16
    PC: Editor 1.83
    iPad2: MixPad

    2012/07/02 at 4:35 pm #30947
    Profile photo of letmefixletmefix
    Participant

    When you run the setup file make sure you right click and select “run as administrator”.

    IDR32
    Motion Computing LE1700
    idontPad1&3
    M-Dante
    M-Waves.

    p.s. I have an extra M-MADI card for sale. PM me if you are interested.

    2012/07/02 at 4:58 pm #30948
    Profile photo of Rui-MiguelRui-Miguel
    Participant

    So,

    OOPSS. I downloaded the 32Bit option, and I’m running Win7/64Bits
    Talk about a rookye mistake!

    So it’s installed, but when I press the ON button it says:

    DVS Error
    Audio Driver Failed (512)

    What am I missing here?
    Currently I’m just running this withou anything connected since I don’t have the M-Dante card yet. Can I test this without the hardware?

    Thanks…

    Surface: T112 / T80
    Rack: iDR48 / iDR16
    PC: Editor 1.83
    iPad2: MixPad

    2012/07/02 at 6:48 pm #30949
    Profile photo of letmefixletmefix
    Participant

    There must be at least one physical Dante device in the network, otherwise you will get that error.

    IDR32
    Motion Computing LE1700
    idontPad1&3
    M-Dante
    M-Waves.

    p.s. I have an extra M-MADI card for sale. PM me if you are interested.

    2012/07/03 at 8:41 am #30952
    Profile photo of ddff_lvddff_lv
    Participant

    Wow, I didn’t know that. How come they did not include this simple note in that message window? That would save lot of voodoo and guessing.

    ddff

    2012/07/03 at 12:45 pm #30954
    Profile photo of StixStix
    Participant

    Actually you can turn DVS on provided you are connected to an active NETWORK. There doesn’t need to be a Dante device on the network. When you open the DVS config software just make sure the Network connection box shows an active connection ( yellow/green LEDs) either 100 mbit or 1000 before you attempt to turn on DVS.

    Cheers

    Richard Howey
    Audio Dynamite Ltd
    IDR48/IDR16/T112/R72/Mixpad,Tweak,
    Dual M-Dante/DVS, 17″MBP/Logic 9/Custom Mackie Control

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Archived iLive Discussions’ is closed to new topics and replies.