Topic: Wifi setup | Allen & Heath Digital Community

Wifi setup

This topic has 5 replies, 5 voices, and was last updated 12 years, 8 months ago by AndyH.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
2012/03/28 at 3:20 pm #23066

Anonymous
Inactive

Hey
I have bought a iPad and the mixapp for the ilive. I need to setup my wireless ap. I set the statik ip to 192.168.1.254, the subnet mask to 255.255.255.0, but the what abort the gateway adress. It carnot be 0.0.0.0 or blank. What should it be.

Casper

2012/03/28 at 5:32 pm #30268

SteffenR
Participant

RTFM or use the search function

SRV-AVB
R-72, iDR-16, xDR-16, Dante

2012/03/28 at 9:32 pm #30273

jgrooms
Participant

quote:

Originally posted by Casbru

Hey
I have bought a iPad and the mixapp for the ilive. I need to setup my wireless ap. I set the statik ip to 192.168.1.254, the subnet mask to 255.255.255.0, but the what abort the gateway adress. It carnot be 0.0.0.0 or blank. What should it be.

Casper

Page 89
https://www.allen-heath.com/UK/CategoryDocuments/iLive%20Reference%20Part%202%20Firmware%20AP6526-2_5.pdf

2012/03/28 at 11:20 pm #30274

RayS
Participant

quote:

Originally posted by steffenromeiss

RTFM or use the search function

FWIW I have never considered RTFM to be an adequate response….it’s just not helpful.

RayS

R-72/iDR32/iPS10

2012/03/29 at 9:27 am #30282

SteffenR
Participant

quote:

Originally posted by RayS

quote:

Originally posted by steffenromeiss

RTFM or use the search function

FWIW I have never considered RTFM to be an adequate response….it’s just not helpful.

RayS

R-72/iDR32/iPS10

I’m sorry but setting up a wireless access point has nothing to do with ilive, it is simply networking.
The manual on the access point should answer some questions. Even the help pages in the console should assist with this “issue” or at least the documentation for the MixPad app.

https://en.wikipedia.org/wiki/Gateway_address
https://iliveforum.allen-heath.com/topic.asp?TOPIC_ID=1676

SRV-AVB
R-72, iDR-16, xDR-16, Dante

2012/03/29 at 10:19 am #30284

AndyH
Moderator

Hi Casbru,

Just wondered how you were getting on with setting up your wireless router?

Your IP address (192.168.1.254) and subnet mask (255.255.255.0) were both correct. But you asked about setting your gateway address.

Gateway addresses are only needed when your wireless router needs to send data outside of the network. In a typical MixPad and iLive setup, this is not used. As you said you were unable to set your gateway to blank, I’d simply recommend setting it to something like 192.168.1.253.

We also have a video online about setting up your wireless router. https://www.youtube.com/watch?v=pqIujmcUDps&feature=plcp&context=C4cad199VDvjVQa1PpcFPBOslVyWKRm3X–wnB_pOQOKRY3TiGjXU%3D

I hope this info helps,

Please post again if you have any other questions

Andy H
Author

Posts