Hi Oscar

quote:

---

Does anyone know if I can use redundant MADI connection between FOH and Monitor console.
Using 1 x IDR-64 w. MADI in port B for stage,
and 1 x IDR-16 w. MADI in port B for FOH.

---

Yes this is possible if you set each MADI module to Redundant mode. to do this go to touchscreen – Mixrack setup – Mixer Preferences Port A/B setup and press redundant mode on the MADI card in each mixrack.

quote:

---

And have both monitor and FOH use the outputs in the IDR-64.
AND have a MADI feed for broadcast/recording truck.

---

Yes you can do a digital mic split using MADI sending all your mic inputs over PortB to the other mixrack.

To do your MADI recording use the MADI Aux BNC. 2 options:
1: Set the module recieving the mic channels to ‘IN 1 THRU’ this will then copy and output all audio coming into Link1 on that module.
or
2: Set the module sending out the mic channels to ‘OUT1 Mirror’ this will mirror the audio being sent out of Link1

Hope that helps

Regards
Sam A&H

quote:

---

Originally posted by Oscar Söderlund

Thanks,

Can the FOH guy send his L&R thru the MADI down to stage and take it out from the monitor/main box.

Best Regards

Oscar

Parashoot
Sweden

---

I’m not sure I understand the question. The FOH L&R would generally already be at the stage, right. If you’re asking whether that can be omitted from the monitor MADI feed, I believe the answer is yes.