Local Monitor Output on R-72

Forums Forums iLive Forums Archived iLive Discussions Local Monitor Output on R-72

This topic contains 16 replies, has 6 voices, and was last updated by Profile photo of SteffenR SteffenR 9 years, 11 months ago.

Viewing 15 posts - 1 through 15 (of 17 total)
  • Author
    Posts
  • #22819
    Profile photo of SteffenR
    SteffenR
    Participant

    I was sitting in a seperate room for mixing a theater show last friday.

    I guess it’s there but I have no idea where I can change the volume for my local monitor out on the R-72…

    SRV-AVB
    R-72, iDR-16, xDR-16

    #28503
    Profile photo of Biggsounds
    Biggsounds
    Participant

    Can you assign it a different matrix send (identical to your main mix)?

    iDR32 mixrack
    MixRack for iPad & Tweak for iPhone apps
    Asus N61 Laptop (x2 wireless) with Belkin PlayMax N600 HD router
    Sennheiser IEM (for PFL)
    Dante card (soon!)

    #28506
    Profile photo of SteffenR
    SteffenR
    Participant

    The matrix was that what I used, but it would be better to have PFL as well on the same outputs. If I use a matrix this isn’t the case.

    SRV-AVB
    R-72, iDR-16, xDR-16

    #28507
    Profile photo of Biggsounds
    Biggsounds
    Participant

    Ah, tricky – I’ll have to defer to someone who uses a console in that case ;)

    iDR32 mixrack
    MixRack for iPad & Tweak for iPhone apps
    Asus N61 Laptop (x2 wireless) with Belkin PlayMax N600 HD router
    Sennheiser IEM (for PFL)
    Dante card (soon!)

    #28512
    Profile photo of AndyH
    AndyH
    Moderator

    You could try using the stereo PAFL wedge outputs. If you assign wedge L and R out of the R72 outputs, then you can assign the wedge channel onto the surface and use it as a volume control.

    Andy

    #28516
    Profile photo of SteffenR
    SteffenR
    Participant

    Using the Wedge Outputs wasn’t an option in this special case, because there was no possibility for reconfiguring the desk to turn processing on wedge on.
    Without processing the wedge out didn’t contain the Main signal as expected.

    Maybe David, Carey or Rob can give me a hint… :-)

    SRV-AVB
    R-72, iDR-16, xDR-16

    #28519
    Profile photo of sraymond
    sraymond
    Participant

    In the PAFL setup screen you can set levels for the main mix to PAFL. This affects the level when no PAFL buttons are selected. That may do what you’re asking for if you want the main mix all the time. It wouldn’t be quickly adjustable as you set the level for each output separately. The inf. settings turns them off. Otherwise you may have to assign a fader/s for wedge monitors as suggested. Page 13 in the PDF getting started guide.

    P.S. There’s always the level knob on the amp powering your monitors. [;)]

    Scott

    iDR 32
    iDR D-Out
    MMO
    Lenova T61, M90, iPad soon I hope.

    #28526
    Profile photo of SteffenR
    SteffenR
    Participant

    quote:


    Originally posted by sraymond

    P.S. There’s always the level knob on the amp powering your monitors. [;)]


    Genelec 8020 over 1,5m away… to difficult

    I assigned the wedge fader but there was no Left/Right signal only PFL.
    Should I activate the processing in the Wedges to have the main always present?

    That is the only thing I hadn’t done so far.

    SRV-AVB
    R-72, iDR-16, xDR-16

    #28529
    Profile photo of AndyH
    AndyH
    Moderator

    No, you shouldn’t need to activate processing to have mains present when nothing is PAFL’d.

    Are you sure you’ve got the mains configured to go to PAFL? You’ll find these options in the PAFL menu. And just ensure mains isn’t muted/DCA muted.

    AndyH

    #28533
    Profile photo of SteffenR
    SteffenR
    Participant

    Nothing is shure in this case, stress level was to high on friday…
    Will it test tomorrow

    SRV-AVB
    R-72, iDR-16, xDR-16

    #28559
    Profile photo of SteffenR
    SteffenR
    Participant

    The wedge fader changes not the volume of the local monitor output. So I can’t see any chance to change the volume on that?

    SRV-AVB
    R-72, iDR-16, xDR-16

    #28579
    Profile photo of Bricasti
    Bricasti
    Participant

    Hi,
    da du einen deutschen Namen führts hoff ich einen User aus Germany gefunden zu haben.Ich bekomme in 10 Tagen meine Ilive T112 inkl.iDRack 48,habe die deutsche Kuzanleitung vom deutschen Vertrieb erhalten,da ich aber im Digital Mixerbereich am Anfang bin,würde ich mich über eine Hilfe sehr freuen.
    Beste Grüße Micha TOP 40 Band Spirit

    Hi,
    I’am a new user,in the next 10 days I buy a Ilive T112…I surch a user from germany,Austria,for example…

    #28581
    Profile photo of zblebt
    zblebt
    Participant

    You can set up the Pre Fader Listening to After Fader Listening with just 1 click, there are 2 buttons left next to the “mains” faders. then, when you have After Fader Listening in your PAFL, you will hear the sound after the fader. :)

    iDR 48
    T112
    waiting for iPad2
    and M-Dante

    #28588
    Profile photo of SteffenR
    SteffenR
    Participant

    Nobody is listening to me…
    My Surface is not T-112, or T-80 it’s R-72 and it has different buttons and it misses the local monitor volume poti.
    That is the problem.

    SRV-AVB
    R-72, iDR-16, xDR-16

    #28589
    Profile photo of SteffenR
    SteffenR
    Participant

    quote:


    Originally posted by Bricasti

    Hi,
    da du einen deutschen Namen führts hoff ich einen User aus Germany gefunden zu haben.Ich bekomme in 10 Tagen meine Ilive T112 inkl.iDRack 48,habe die deutsche Kuzanleitung vom deutschen Vertrieb erhalten,da ich aber im Digital Mixerbereich am Anfang bin,würde ich mich über eine Hilfe sehr freuen.


    Ein deutsches Forum ist hier zu finden: http://www.iliveuser.de/index.php

    For the english speaking… above is a link to a german user forum dedicated to the iLive system.

    SRV-AVB
    R-72, iDR-16, xDR-16

Viewing 15 posts - 1 through 15 (of 17 total)

The forum ‘Archived iLive Discussions’ is closed to new topics and replies.