Local Monitor Output on R-72

Forums › Forums › iLive Forums › Archived iLive Discussions › Local Monitor Output on R-72

This topic contains 16 replies, has 6 voices, and was last updated by Profile photo of SteffenR SteffenR 12 years, 10 months ago.

Viewing 2 posts - 16 through 17 (of 17 total)
1 2
  • Author
    Posts
  • 2011/06/14 at 2:42 pm #28594
    Profile photo of AndyH
    AndyH
    Moderator

    Hi Steffenromeiss,

    You said “The wedge fader changes not the volume of the local monitor output”. Yes that is correct, I said in my first post that you must use “the stereo PAFL wedge outputs. Assign wedge L and R out of the R72 outputs”. Then you can assign the wedge volume control/fader anywhere on the surface (in several different places if you like) to adjust your PAFL/monitor volume.

    Unfortunately there is no volume control on the R72 for the Local Monitor Outputs. You have to use a different monitor output if you require a volume control on the board, such as the Wedge monitor.

    AndyH

    2011/06/14 at 2:56 pm #28595
    Profile photo of SteffenR
    SteffenR
    Participant

    quote:

    Originally posted by AndyH

    Unfortunately there is no volume control on the R72 for the Local Monitor Outputs. You have to use a different monitor output if you require a volume control on the board, such as the Wedge monitor.

    So why is there no volume control? Don’t get the point in this.
    Was it a space issue in the surface design?

    Is it possible to add one?

    SRV-AVB
    R-72, iDR-16, xDR-16

  • Author
    Posts
Viewing 2 posts - 16 through 17 (of 17 total)
1 2

The forum ‘Archived iLive Discussions’ is closed to new topics and replies.