T112 Console hangs while booting

Forums › Forums › iLive Forums › Archived iLive Discussions › T112 Console hangs while booting

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2011/04/29 at 4:47 pm #22750
    Profile photo of MusikhofMusikhof
    Participant

    Since 1.81 (has never happend with V 1.80) every 2nd to 3rd time when i boot up the T112 console (on a idr48) it shows the boot menu, then the white promt in the upper left corner starts blinking and than the console hang up. Dark screen, no channel lights on, nothing happened…

    After switching off and back on again, it always works fine.

    And YES – i always switch the idr first and wait until it´s up and running before i switch on the console.

    And YES – i always shut the console down by screen first before switching off the idr.

    As said – this has never happened with 1.80.

    idr48 – T112
    iPad – Notebook with Editor
    Belkin Wireless
    Dante … whenever ready
    Dedicated recording PC with Samplitude

    2011/05/03 at 11:49 am #28143
    Profile photo of StealthStealth
    Moderator

    Hi Musikhof

    Can you please try this with v1.82 when it is released later this week?

    if the problem persists please go back to a basic setup with all devices on default settings and no other equipment connected e.g. wireless router etc.
    If still persists please contact A&H Technical Support with a detailed description of the problem and a copy of the event logs:

    https://www.allen-heath.com/support

    Regards
    Sam A&H

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Archived iLive Discussions’ is closed to new topics and replies.