Sending sync SMTPE code to FOH

Forums › Forums › iLive Forums › Archived iLive Discussions › Sending sync SMTPE code to FOH

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2010/09/22 at 10:17 pm #22472
    Profile photo of Oscar-SoderlundOscar-Soderlund
    Participant

    Hi,

    On the latest Teddybears tour we where trying to send a backtrack sync code using SMTPE from a MOTU interface to FOH, for syncing the lights.

    Here’s how we tried:
    Midi out from motu to Midi in on the IDR-48 used.
    The Midi out from surface to Midi in at the Grand MA Lighting desk.
    Using global addresses

    Couldn’t get it to work…
    When we ran the Midi cable straight to the Grand MA Lighting desk it worked fine.

    Is this something somebody else have tried, and/or have any experience of.
    Would be very nice to be able to do this.

    Thanks,

    Oscar

    Parashoot
    Sweden

    2010/09/23 at 3:52 pm #26472
    Profile photo of StealthStealth
    Moderator

    Hi Oscar

    This is a known issue in the system, we are currently investigating the problem and hope to have a fix soon.

    Regards
    Sam A&H

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Archived iLive Discussions’ is closed to new topics and replies.