Firmware 1.52????

Forums Forums iLive Forums Archived iLive Discussions Firmware 1.52????

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #22141
    Profile photo of SlamminSlammin
    Participant

    Hi,

    When will this be released? I saw that you were running it at Plasa.

    #24704
    Profile photo of PeterMPeterM
    Participant

    quote:


    Originally posted by Slammin

    Hi,

    When will this be released? I saw that you were running it at Plasa.


    1.53 is out, but will it work with a 1.0GHz Touch Screen Computer ?

    This is what AH said…

    Firmware V1.51 and V1.53 when used on iLive-80, iLive-112, iLive-144 and iLive-176
    Some customers have experienced problems with iLive system speed relating to channel naming with V1.50 or V1.51 firmware. This issue only affects older systems which use a 1.0 GHz control surface Touch Screen Computer.

    We are currently working on the next maintenance release (Question – 1.53 or 1.54???)which will fix this problem for 1.0 GHz Touch Screen Computers. This firmware is expected to be released shortly

    Meanwhile if your iLive control surface has a 1.0GHz Touch Screen Computer and you are experiencing problems, we advise you to revert to V1.43 firmware. Please be aware that in doing so, any shows that have been prepared in version 1.5 will not work – in which case you should revert to your V1.43 shows. Please visit http://www.ilive-digital.com/firmware in order to download V1.43.



    0001608: Channel naming The TouchScreen could slow down or freeze when naming
    channels quickly – performance has been improved.

    Question – improved or fixed ????

    Regards
    Peter

    #24705
    Profile photo of StealthStealth
    Moderator

    Hi Pete

    Yes, 1.53 will work with 1Ghz SBC’s. Sorry for any confusion, there was a typo on our website. The section explaining that 1Ghz SBC users may have problems should only refer to 1.50 and 1.51 users.

    0001608: Channel naming issue – This is now fixed in version 1.53

    Best Regards
    Sam A&H

    #24706
    Profile photo of PeterMPeterM
    Participant

    quote:


    Originally posted by Stealth

    Hi Pete

    Yes, 1.53 will work with 1Ghz SBC’s. Sorry for any confusion, there was a typo on our website. The section explaining that 1Ghz SBC users may have problems should only refer to 1.50 and 1.51 users.

    0001608: Channel naming issue – This is now fixed in version 1.53

    Best Regards
    Sam A&H


    Just wanted to be 200% sure – many thanks.

    Peter

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Archived iLive Discussions’ is closed to new topics and replies.