Forums › Forums › dLive Forums › dLive General Discussions › Global direct out source option › Reply To: Global direct out source option
Hi letmefix
If you want to send input sockets post preamp to an IO card, you can simply source these IO card outputs to the Rack Input sockets (post preamp) directly. These would not be affected by direct out send point option, so you could set this to suit your other sends.
The IO cards are all freely assignable in terms of outputs, and any input can source from any IO card. You could take channel 1 from IO card 3, channel 2 from IO card 1, etc.
See Nicola’s comment here regarding Editor/ipad control.
If you’re using the existing Dante card with the letterbox adapter card, the adapter contains rate conversion to/from 48 kHz.
hope this helps
– Jeff, A&H