ME Daisy chained after 2 DXs

[John F.]

Howdy,

I’ve been running with 2 SQs and an ME system for about a year now. An SQ7 @ Foh connected to our broadcast SQ5 via Slink i/o card on the FOH Desk. Our ME system is run of the Slink Out, I’d like to add 2 DX168’s to this run. Manual’s that I’ve seen have only shown 2 i/o’s downstream of an Slink Connect. Is it possible to do this?

The intention is to remove analog i/o cable and go DX and then patch that through to broadcast, while also keeping the ME System. I’d guess the alternative is to add a DX Hub, but that would be another piece of equipment.

Thanks

[Showtime]

The dx168 is 96KHZ only, the me system is 48KHZ only.

You cant connect a me after a dx168.

THe only option is not to buy 2 dx168 but 1 gx4816, this unit has 2 dx port’s but the second dx port is also me port.

See : https://www.allen-heath.com/ahproducts/io-gx4816/

DX hub is also 96KHZ only.

Richard

[MarkPAman]

Another SLink card in the other SQ should allow the ME to be plugged in there.

AB or AR boxes would also allow the ME to be used.

[Author]

Posts