[MoleParticipant]

Thanks for getting back so quick.
mines been doing this for a few days now tried the hard reset which i thought had cracked it, but just came back after an hour.
going to contact A&H tomorrow, see what they got to say!!
ill let you know the outcome.
paul

[MoleParticipant]

Hi CCb,
sorry to bring up an old thread but this is the exact same problem I’m having.
just wondering if you found a solution to it.
btw I’ve tried a hard rest and it lengthened the time to an hour or so before the problem reoccurred.
regards
paul

[MoleParticipant]

My problem is back. ten mins after startup all faders go to sleep!!!
Had a gig last night, was a bit of a nightmare, luckily qu pad still operated normally, couldn’t touch the desk from 10 mins after startup for 3 hours!!
going to contact a&h tomorrow!

[MoleParticipant]

Hard reset seems to have fixed the problem.
Thanks all.

[MoleParticipant]

back to 1.73 same thing going on. faders have stopped moving.As you move through different layers the sound changes to where the faders are frozen!!

Hay MarkPAmin did you find a solution?
Gig tomorrow should be fun!!

[MoleParticipant]

ok.
Just about to back date firmware!
after a bit of a play seems to be brought on by the use of GEQ. not as soon as i use it but very shortly after..
will post back after.

[MoleParticipant]

Hi all.
I’ve just updated firmware and am having a similar issue. Though different.
When i start the desc alls fine faders moving as should between mixes etc.
after ten or twenty mins of mixing on the pad i notice that faders have stopped moving though all recalling in the qu pad.
just done a test with the router disconnected, restarted, all ok. ten mins faders have gone to sleep…. …..
oh dear!

[Author]

Posts