Thanks for the answers;
@ryan I looked into the manual and I found this about the audio setting(p78)
CH/ST/Grp source button
Set this to Insert Sends if you do not want the input channel and group USB sends to be affected by the mixer processing (EQ, Comp, Gate, Delay). This sends the raw Preamp and unprocessed Group signals to theUSB stream and is the typical setting for live recording.
Set this to Direct Outs if you want the input channel USB sends to follow the channel global Direct Output
option. It also sets the Group sends to be postprocessing and post-fader. This is the typical setting for studio recording (working with a DAW). The global Direct Output option affects all inputs and is set in the channel Routing screen. Stream audio back to the Qu mixer – Audio isreturned via USB B. This is mapped one-to-one to the inputs channels. Use the Preamp screen Fn key
Source page to patch USB B to the channels. Make sure you have set ‘USB B Streaming’ as the global USB source.
I suppose I have to use the ‘Insert Sends’ setting?
@mikec
The band uses 5 monitors on stage, roughly 80 dB is coming from the monitors. The church is large and we are always working around the acoustics.
We have one electric guitar and an electronic drumkit, the latter is using a monitormix from the QU32. I can put the recorded mix to the monitor mix I created, or is it also very differents