[isaacParticipant]

Psm1000 is actually really useful, if you can see whether the RF is muted and what the level going into the unit is.

Regardless of how old they are, there is a lot of UHF-R out there.

[isaacParticipant]

Is there any particular reason you are using a DM0 with the monitor console? The way we do dual surface is one DM64 with an additional GigaAce card. Main GigaAce goes to FOH console, option card GigaAce goes to monitor console. Gain sharing across aprox 40 inputs. We started with the dual surface mon/foh preset show files. The only thing I can see you gain with your setup is talkback through the console talkback page for each console.

[isaacParticipant]

Thanks for that,

I’m more concerned with representing the daisy chained 168s in Director.

As far I can tell I can only access 32 channels in total via director. Or do I just need to patch them anyway, and it’ll sort out when I load the show on actual hardware?

Thanks,

Isaac P

[isaacParticipant]

Yeah I had an incorrect setting in there. Console is in another city so can’t post a photo sorry.

Good lesson to learn not during show!

Any information on a hard reset?

Isaac p

[isaacParticipant]

Or use the click example. Route it to two inputs, Route one direct to L/R, and route the other through a group. pan both to centre. Phase invert one signal. If you hear nothing then the GLD is compensating for the the group outing.

I would also try it with music.

Isaac P

[Author]

Posts