[gillyParticipant]

What is Lirc Bob?
I know its configurable but not sure what exactly Standard users are Not able to do

[gillyParticipant]

And i forgot to say, all the outputs are going to amps and then onto the speakers (obviously)

[gillyParticipant]

Yes Bob there are different delays on each Matrix and Group out. I would have thought you could set all the outputs (Group and Matrix) pre-fade or post-fade, but it seems not?

[gillyParticipant]

Hi guys.
We just got the Qu-24 installed in the church on Thursday and i tried some recordings yesterday. I downloaded the QU-Driver software onto PC. Connecting the Alt out jack output (set at level 7 on desk) into the existing jack to USB converter (which connects to PC USB) everything works as before using Mp3DirectCut. I then tried connecting from desk USB-B directly into PC USB and again using Mp3DC,and as you said above the recording level is so low i can hardly hear a thing. I now have to figure how to raise the send level from desk. Will try that later.

[gillyParticipant]

Bob why wouldnt Mp3DirectCut work ok instead of Audacity. Thats the way it is now on our GL2000. Connect from USB-B output directly into PC that has Mp3DirectCut on it.

Can’t see why A & H have to complicate things by having 24 tracks being sent when just recording 1 or 1 pair of stereo channels

[gillyParticipant]

Thanks Andreas for your detailed reply. And also thanks to the others for your input.
Andreas you wrote:
– Use the top USB connector and connect some type of USB disk (HDD/SDD/Stick) to record WAV (stereo or 18 tracks). Later copying to PC and conversion to MP3 is required.

What is involved in copying the WAV files to PC and converting to MP3. What conversion tool would you recommend.

[gillyParticipant]

Meant Mp3DirectCut

[gillyParticipant]

Ok i just found on web that DAW is a recording software package. But i already have Mp3Cut on PC,is this not a DAW

[gillyParticipant]

Thanks Cornelius.
Yes i read about the DAW but couldnt quite understand. Is a DAW an actual separate hardware device or some software package you download to PC?

[gillyParticipant]

Yes i realise i can continue recording the same way as before but was hoping not to need to use the analogue interface. Andreas i didn’t think you could go direct from desk usb to pc usb. The manual says u need to record onto usb drive first then copy from this to pc??

[Author]

Posts