Avantis – Avantis Director – Recording

Forums Forums Avantis Forums Avantis feature suggestions Avantis – Avantis Director – Recording

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Brian Brian 2 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #122016
    Profile photo of DBI Pro
    DBI Pro
    Participant

    If the Avantis Director could record all tracks while you’re connected via Ethernet in any port
    It would be cool.

    It just needs to record the tracks and save them in a file so we can put those wav files in any saw we want without having to download waves since we aren’t actually going to be using waves.

    #122067
    Profile photo of Brian
    Brian
    Participant

    The Director software (or really any control software like the other OEM apps, or third party apps like Mixing Station) is just a remote display of the console combined with remote control of the console’s controls. Even the metering on the software is just a remote display of the meter levels on the console. Long story short, the console doesn’t pass any audio to these apps. Therefore would be impossible to record audio in the Director app because there isn’t any audio to record. To “add” the audio to the Director connection would likely overwhelm and slow the response of the Director software to the point of it being unusable.

    If you need to record audio from your console, there are plenty of existing solutions. You just need to pick one.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.