Forum Replies Created
Viewing 4 posts - 1 through 4 (of 4 total)
Viewing 4 posts - 1 through 4 (of 4 total)
@Ro – I am running Catalina and have no problems using the GS-R24 as the recording interface – it has always worked flawlessly and continues to do so. However, I have never used it in active fader mode, using the faders to either control or to mirror faders in software (I use Logic primarily). It just seems like it would be too complicated, and I couldn’t see how it would help my general workflow. So I can’t speak to whether that aspect of the mixer works under my current set-up.
And for anyone following the original question, I have purchased a Focusrite USB interface and am feeding the main output of the A&H into it and thus into OBS, all of which seems to work fine for livestreams in my initial test runs.
Thanks to all and all best wishes!
Thanks all! Steffen R – not sure what that means to make the mixer appear as a Windows audio device. I’m running a Mac, but would be happy to do whatever might help. Thanks –
Thanks volounteer – I’m thinking that may be the simplest solution. OBS is definitely not seeing outputs 1 and 2 – I have run a mic into Channel 1 and brought it up to see if it registers in OBS, and it does not. And I may find some use for an extra little interface beyond this application – who knows? Thanks to all for your thoughts and input – much appreciated! Happy New Year to all!
Thanks Steffens and Mike – I was thinking that was probably the case, so I ran a Mike into channel 1 to see if it showed up on the OBS meters, but got nothing. Of course, I would like for OBS to be seeing outputs 31 and 32, being the stereo out of the mixer, but I could probably figure out a way to physically patch the mixer so that the snaking stereo out was feeding back into channels 1 and 2. But I can’t see any input on OBS from them either. Wondering if I need some kind of other software running in between to be able to digitally patch things around and make signal show up in OBS. Out of my depth I’m afraid. I’m thinking I may buy a small 2 or 4 output interface (Focusrite etc) and just patch the analog out from the GS-R24 into that. I can wrap my head around that solution anyway, but would love to just get the GS-R24 to work. Thanks again for your input – I’ll keep Messing with it.
Please create an account to get started.