[CrowndogParticipant]

Thanks guys,
Looks like I’ll get the DI

[CrowndogParticipant]

Crowndog
Im probably not understanding your query properly, but if you want the FOH muted but the Mix outputs enabled for the in ears, why not just leave all the used channels unmuted but mute the LR?

I need to keep the LR open for the iPod.

We used both methods above (unselecting channels in LR and also using a DCA fader) with great success on the weekend. Using the DCA did also mute the fx in our ears so the de selecting channels was the preferred method.

Sent from my iPhone using Tapatalk

[CrowndogParticipant]

Great suggestion Bob, i think ill do that. Very easy!

[CrowndogParticipant]

Unfortunately that doesn’t work either. I really appreciate your help, i probably will do a factory reset but not until after my gigs this weekend, I’ve spent so much time setting it up and everything else works well.

[CrowndogParticipant]

yeah i can change individual channels no problems, actually thats probably what i will do, it works fine. I was just curious why i couldn’t get them to all assign with the one button press. I am logged in as admin as well

[CrowndogParticipant]

Im definitely holding the Assign button (the bottom one) It actually works when i press the mix select or FX select buttons, just not the LR

[CrowndogParticipant]

I’m trying to use the Assign-Select (on LR) to select and deselect all channels but it doesn’t do anything? it works on the FX’s and Mix selects but not the LR. i read the manual and i can’t see where it would be a feature you could turn on and off. Any suggestions?? (puts on another puppy face)

[CrowndogParticipant]

BRILLIANT!!!! i knew someone would have an answer (why didn’t i think of that?? 🙂

[CrowndogParticipant]

Thanks Andreas, i never check direct monitoring in cubase but maybe it was checked. I won’t get the desk back until tomorrow to see but with a different audio interface, the direct monitoring is un checked. Im using an iMac, and i set the default output to be ST3, but even when i changed the output in Cubase to ST2 i got the same result.
Anyway, not a big problem, i thought it might be a simple user error. Ill have a look at the direct monitoring when i get the desk back.
By the way, Ive read a lot of your posts in the last few weeks and have learnt a great deal, i thank you very much

[Author]

Posts