[AndyParticipant]

Ok so here is my setup.

I currently run the 11/12 xlr outputs as my main mix out to power amps and then to loudspeakers. My L/R mix feeds the 11/12 xlr output jacks. My drum and bass guitar bus is group 9 and my other instruments are group 10 and these two groups are routed into the main L/R mix feed. Here is my question. Can I also use group 11 and also group 12 for two more buses (vocals on 11 and anything else on 12) and route them into the main L/R mix or are groups 11 and 12 hardwired to the 11/12 physical xlr output jacks?

thanks

[AndyParticipant]

Based on Allen & Heath’s acclaimed XCVI 96kHz FPGA audio engine, the SQ-5 digital mixer delivers extensive live sound mixing capabilities. Even with its powerful processing, the SQ-5 delivers best-in-class audio quality with less than 0.7ms of latency. You’ll have a lot of flexibility when it comes to creating monitor mixes, with up to 12 stereo mixes (groups or auxiliaries) in addition to the main LR out.

So help me understand if I’m correct then you can only have 6 stereo mixes coming out of the SQ5 (6 XLR outs dedicated for left and 6 XLR outs dedicated for right channel outputs)
Is this correct?

[AndyParticipant]

Is there a way to toggle between reverb patches? Soft keys or footswitch?

[AndyParticipant]

Yes please

[AndyParticipant]

So…can you route the effects return to a channel?

[AndyParticipant]

how do I set up using an input channel as a FX return?

[AndyParticipant]

When I change from a mono input to a stereo input one of the scribble strips goes blank and I loose the use of that fader. Is there a way to have two stereo inputs side by side on the board without a blank one in between them, or a stereo and then a mono channel right beside it without a blank scribble strip in between them?

I have the SQ5 board

Thanks

[AndyParticipant]

AR2412 through the Slink but it has been woeking just fine and this burst happened both times about 1 hr into the services

I found this link on the forum from a QU 16 and the video sounds exactly what my issue sounds like
It wont let me copy and paste it here.
Please help

[Author]

Posts