SQ fx change

Forums › Forums › SQ Forums › SQ general discussions › SQ fx change

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of Andy Andy 3 years ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2021/04/11 at 11:26 am #100602
    Profile photo of Andy
    Andy
    Participant

    Is there a way to use the foot controller on the SQ to toggle back and forth between two different reverb presets? Basically when speaking one reverb setting is desired and then when singing another reverb setting is desired.
    Thanks

    2021/04/11 at 3:07 pm #100616
    Profile photo of tourtelot
    tourtelot
    Participant

    Oooh. Good idea.

    D.

    2021/04/11 at 3:19 pm #100617
    Profile photo of Andre S
    Andre S
    Participant

    Hi Andy

    I´m not on my board right now, but from the memory you can switch scenes and mutegroups.
    1) Make two scenes and change those with the footswitch.
    2) Load to different reverbs, put them in a mutegroup and mute/unmute with the footswitch.

    Cheers,
    André

    2021/04/12 at 11:57 pm #100648
    Profile photo of Andy
    Andy
    Participant

    Is there a way to toggle between reverb patches? Soft keys or footswitch?

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.