"view" key

Forums › Forums › SQ Forums › SQ troubleshooting › "view" key

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Søren Steinmetz Søren Steinmetz 3 years, 6 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2020/10/10 at 8:26 am #95606
    Profile photo of jb07
    jb07
    Participant

    When you press the “view” button, you have the connection address for each input. Very practical when using remote boxes. Why does it not work on auxiliaries, it displays “N / A”

    2020/10/10 at 4:12 pm #95612
    Profile photo of Søren Steinmetz
    Søren Steinmetz
    Participant

    The AUX can be patched to multiple output sockets, like local 1 and S-Link 1 or more.

    Then it should cycle through all the sockets the AUX is patched to.

    Where on the input side it is much more usable to fast see what socket has been patched to the channel.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.