Urgent – DX168 rack gain not functioning correctly.

Forums Forums SQ Forums SQ troubleshooting Urgent – DX168 rack gain not functioning correctly.

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of Phill Phill 5 years, 3 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #71394
    Profile photo of Ana

    After using 2 of my DX168’s with a dLive today they now report (and send) much higher gain than normal to the SQ5 – to the point where Pads need to be used on every channel for the gain to be where one would expect. They were updated by the dLive V1.7 software today. My third rack that has not been updated and functions as normal.

    Would love for this to be fixed ASAP given the busy days ahead…

    Profile photo of Art

    Were the DX168’s really updated with V1.7 because I didn’t have mine connected with I did the update on my dLive.

    Profile photo of Phill

    thats interesting as I had a similar issue this week…
    I was running SQ6 with single DX168
    I found that after recalling a known good show file with the same mics as when used on the last job that the gains all needed pulling back at least 12-18db I has assumed I’d done something wrong until I read this.. has this been reported before?
    Also what are you using to update the stage box firmware?

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.