Talkback Footswitch

Forums Forums Qu Forums Qu feature suggestions Talkback Footswitch

This topic contains 5 replies, has 5 voices, and was last updated by Profile photo of Lee7 Lee7 2 years, 4 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #63709
    Profile photo of LKY
    LKY
    Participant

    So,

    I’m wondering if anyone hasd, or the asbility to run a foot or hand switch for talkback…

    Currently use a qu-32 for que mixes only…And have to use my ipad for the talkback (qu control or qu pad app)

    Be very nice to have a dedicated hard button for this task.

    #63710
    Profile photo of airickess
    airickess
    Participant

    The button labeled TALK just below the LR meters on the upper right hand side of the console is your talkback button.
    See pg. 62 section 11.2 of the manual for configuration details –
    http://www.allen-heath.com/media/Qu-Mixer-Reference-Guide-AP9372_9.pdf

    #63711
    Profile photo of MarkPAman
    MarkPAman
    Participant

    How about setting the talk button to latching, turning it on, and using a microphone mute switch.

    http://www.orchid-electronics.co.uk/balanced_mic_mute.htm is a good one, silent and very solidly built, but there are others available.

    #63801
    Profile photo of Einstein
    Einstein
    Participant

    Programming a soft key as a on/off switch could work in your desk

    #64232
    Profile photo of LKY
    LKY
    Participant

    Well,

    I could use the manual mute switch…

    The rest, as the console is out of my reach, I’m sitting in front of a GS-R24m, so the qu is on the far side of the desk for que mixing only.

    #64238
    Profile photo of Lee7
    Lee7
    Participant

    Or just use a wired mic that has an on/off switch?

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.