T112. Can’t get external screen to work. White Screen of death.

Forums Forums iLive Forums iLive troubleshooting T112. Can’t get external screen to work. White Screen of death.

Viewing 5 posts - 16 through 20 (of 20 total)
  • Author
    Posts
  • #126498
    Profile photo of DeweyDewey
    Participant

    I have not tried it. Do you need a external monitor attached when try this?

    #126559
    Profile photo of DeweyDewey
    Participant

    Also what is the best way to access the computer fully? I have taken off the sides and the back of the T112, but I can’t seem to get enough access to any of the pins that you mentioned.

    #126599
    Profile photo of DeweyDewey
    Participant

    So I took the screws holding the SBC out and was able to wiggle the SBC out the console. I then bought a cheap power PC power switch from Amazon. I hooked this up to pins 6 and 8 as per the recommendation and the motherboard documentation. I put the SBC back in place and powered up the console. The SBC didn’t go on when the console powered up, but when I pressed this the external PC power switch, it sprang to life and I had video on the external monitor and the USB keyboard was working. I followed the BIOS reset instructions, restarted the console and the touchscreen came to life and booted up.

    Thanks so much for letting me fix. I hope this will help other people out who are having the same issue.

    #126630
    Profile photo of fender_jazz_72fender_jazz_72
    Participant

    That’s excellent news, well done 🙂

    #126980
    Profile photo of DeweyDewey
    Participant

    I got the computer working, but at this time I am unable to get the computer to communicate with the mix rack and T112 surface. I have hit the network reset buttons on the surface and the mix rack and they IP addresses for the Mix rack and surface are the correct ones that computer should be looking for, but the computer cannot connect. Is there any configuration I need to do in the computer BIOS to setup the network?

Viewing 5 posts - 16 through 20 (of 20 total)
  • You must be logged in to reply to this topic.